The Andros Video Switcher is
designed to upgrade the single 19-Pin J32 weapon's camera port on Andros Robots
to allow weapons control for two weapons and a total of 4 cameras.It uses Velcro straps to mount just forward
of the left weapons mount.It has four
ports:
VideoPort 1 is an exact duplicate of the 19-Pin J32 connector
on the robot arm including power and control for video, lasers, shotgun
solenoid, and lights.
VideoPort 2 is a reduced function 19-Pin J32 connector with
video, video power, and laser control.
Video Ports 3
& 4 are standard connectors with video and video power only, but come with
adapters to connect one port to the standard Andros 6-Pin camera connector on Andros weapons cameras and the other port to an
off-the-shelf bullet camera with a BNC and power connector.
Video ports are changed by
toggling the Laser switch on the Andros OCU.Every time the Laser switch is toggled, the video cycles to the next
video port.To activate the lasers on
Video Ports one or two, just hold the Laser switch for more than half a second while
viewing the desired port, and the lasers will stay on as long as the switch is
held.
